Payment & Shipping Terms:
|Material:||Carbon Steel||Application:||Feeding Material Into Furnace|
IF induction electric furnace automatic manipulator for feeding material
The Robotic arm Machine is applied in the medium frequency induction furnace steel making workshop, installed between two furnace shells.
1. the person does not need to operate directly to the mouth of the furnace, using the remote control operation, safety, reduce the accident rate;
2. reduce labor intensity, saving labor, reduce the original four people to 2 people
3. make scrap material to achieve no blocking phenomenon, quickly melting rate, the average per furnace tapping time will be fast 8 to 10 minutes (if use of light and thin materials will be faster. , so that to improve more than 10% of the steel yield;
4. because tapping quickly, so it will be save electrical power about 3 to 5KWH/ton
5. makes the furnace refractory more durable, due to rapid pressure, the refractory is not easy to bear high heat, if a furnace can only use 30~ 32 furnace before time , now, the furnace can be used for at least about 38heats .
6. can be used to lift refractory materials when the workshop is busy, so that save time and labor.
Scope of supply description
|1||Robotic arm Main device||set||1|
|2||Hydraulic station||set||1||Without pipe(Fuel tank to equipment inlet pipe),provides by the user|
|3||electronic control system ( remote control )||set||1||Without field cable and installation accessories|
1.Installation site: on the platform of center distance and line Between two furnace.
2.Working condition: High temperature and high pressure.