Payment & Shipping Terms:
|Usage:||Hot Billet Cutter||Cutting Angle:||Horizontal|
|Cutting Temperature:||More Than 800℃||Steel Billet Range:||80-200mm|
Automatic hot steel billet horizontal cutter synchronous billet cutter
Specifically for cut to length of red hot state round and square carbon steel billet, alloy steel billet and stainless steel billet. it include four column hydraulic shear cutter, crocodile type billet cutter, 45 degree diagnal hot billet cutter.
Function: Cut to length → Sync tracking cut → Auto return → Next working circle
Single work process time: 8-10 seconds
Scissors cooling method: circulating water within the cold
Oil tank hydraulic oil cooling way: serpentine tube water cycle cold
Start mode: decompression start
Working conditions: billet temperature ≥ 800 C
Small steel billet continuous casting machine
Annual output is 30000~50000t with continuous production, customers do not have to stop production or produce discontinuous due to insufficient steel scraps.
Require small area and low elevation, CCM main body occupies around 22m *8m*9m.
Low power consumption,
High reliability, minimum investment, simple installation
Integral lifting and installation turn on the water, gas, power supply to use.
Lower requirement of steel production capacity, start production with one set of electric furnace with capacity more than 0.5T
Various steel casting modes, such as manually carry ladle to cast, rail cars land casting, gantry crane, crane sling ladle casting, furnace casting directly, and multi- furnace continuous casting.
With 250 or 280 mill stands, only need to allocate with simple soaking process, continuous casting and rolling can be realized.
Simple and reliable operation, easy maintenance
Continuous casting material of low, medium and high carbon steel, alloy steel, stainless steel, etc.
Low requirement to cooling water
Billet caster is in complete set of equipment to casting high temperature molten steel into steel billet, which has certain cross section and length, based on different cross sections, there are 2 main typs of casting machine.
Continuous casting machine/CCM
Horizontal casting machine
Square billet size from 60x60mm to 200mmx200mm
Slab size from 150X225mm to 165x330mm
Round billet diameter from dia100-300mm.
All types of casting machine have following components: steel ladles support equipment, main equipment, roller table and billet cutting machine and cooling bed.
The billet caster equiped with scrap steel IF induction electric melting furnace or arc furnace, steel billet monthly output about 2000t-15000t, configured with different models of rolling stands, processing to finished steel products, angle steel, deformed bar, steel bar, channel steel etc.
|3||Single cutting time||second||8-10|
|4||Cooling mode||circulating water inside cooling|
|5||Tank hydraulic oil cooling||cold water circulation within the serpentine tube|
|6||Start method||step down start|
|7||Working condition||billet temperature more than or equal to 800 C°|
|8||Dimension of cutting machine||mm||2000*1700*800|
|9||Dimension of pump station||mm||1200*1000*1000|