Round taper billet Dia50-60 vertical casting mould for small capacity billet casting

Round taper billet Dia50-60 vertical casting mould for small capacity billet casting

For produce billet size:

Round billet from φ50-60-φ140-150mm length 1.5m

Square billet from 80*90mm-140*150mm length 1.5m

Out put: 2.5min/pc (not include liquid steel pouring time)

6min/pc (include steel pouring time)

Main parts: 1. Vibration device

2. Hydraulic drive of bottom

3. Mould

4. Main frame

5. 2 pcs of vibration motor+ 2 sets of vibration staring cabinet

6. 1 set of oil station+ oil station control cabinet

7. 8 pcs of high pressure soft pipes

Provide by customer:

Working steel platform (above ground), if discharge is under ground, platform is not need.

Water pump+water hard pipe and soft pipes

Hydraulic hard pipe and soft pipes

Spare parts:

Copper tube: one 1.6m copper tube can be used for 3-4 mouth (12-24 hours continuous work)

Required water tank:

30m3 for one strand

40m3 for 2 strands

More strands/moulds, larger tank needs.

Advantages over sand casting:

1. The surface is smoother without sand

2. High density, no airhole

3. Fewer workers are needed, the machine can be used repeatedly

The difference from semi-continuous casting to continuous casting machine

1. Taper shape billet(one end is narrow, the other end is wide)

2. The billet length is fixed at 1.5 meter

3. No need of straightening work, it can casting special steel

4. Not subject to steel grade, carbon steel is the best. so does the stainless steel if requirement are not high.